Vitapur VWD2636W-3 Use and Care Guide download pdf (Page 7)

Hot Cool

Cleaning the Inside of the Dispenser

To prevent mineral deposits that can affect the taste and flow of the water, and to ensure

proper product performance, your water dispenser must cleaned every 4 months.

1. Make sure power switch is in the OFF position.

2. Remove the water bottle and bottle support collar.

3. Drain the reservoirs. (See Draining the Reservoirs).

4. Pour water dispenser cleaner or a mixture of 0.3 gal / 1 L of

vinegar with 0.3 gal / 1 L of hot water into the reservoir and wait

20 minutes. If using a water dispenser cleaning solution, please follow

the manufacturers’ instructions.

IMPORTANT: To avoid water overflow while cleaning dispenser, always

remove the bottle support collar before pouring water or cleaning

solution into the reservoir.

(See Figure A, page 3).

5. Press all dispensing buttons until water no longer comes out.

6. Drain the reservoirs.

IMPORTANT: Collect the water into a container, not the drip tray.

7. Rinse with clean water.

8. Replace the bottle support collar and the water bottle. (See Installing the Water Bottle).

IMPORTANT: Drain approximately 4 glasses of water from each button before initial use.

This does not need to be done with replacement bottles.

Going Away on Vacation

When not using the dispenser for long periods of time or when going on vacation, conserve energy

by setting all power switches to the OFF position, unplug the dispenser and drain the reservoirs.

(See Draining the Reservoirs). Follow Initial Product Cleaning Procedures upon return and startup

of the dispenser.

Draining the Reservoirs

Drain the reservoirs before and after cleaning, when going on long

vacations or if not using the dispenser for long periods of time.

IMPORTANT! Turn power switch to the OFF position and unplug

the dispenser before performing this procedure. Dispense hot water

until temperature drops to a safe level to avoid the risk of scalding.

1. Remove the water bottle.

2. Press all dispenser buttons until water no longer comes out.

3. Place a bucket beneath the drain outlets on the bottom of the unit.

4. Remove the cap and plug from the drain outlets and let the water flow

into the bucket. Replace the cap and plug.

IMPORTANT: Collect the water in a container, not the drip tray.

5. Replace the water bottle. (See Installing the Water Bottle).

Cleaning Kit

Available online at

www.greenwayhp.com

bottom of dispenser

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Vitapur VWD2636W-3 Use and Care Guide Page 7

Comments to this Manuals

Related products and manuals for Water dispensers Vitapur VWD2636W-3